6.8 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633806.8
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 109 MM, SPIRAL LENGTH 69 MM
21.89
Hardmetal Drills
The drill is suitable for drilling in abrasive materials such as cast iron, asbestos cement and hardened materials, gears etc. The HM plates can be grinded and it should use a fine grained grindstone.
6.9 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633806.9
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 109 MM, SPIRAL LENGTH 69 MM
44.82
7.0 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633807.0
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 109 MM, SPIRAL LENGTH 69 MM
23.97
7.1 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633807.1
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 109 MM, SPIRAL LENGTH 69 MM
44.82
7.2 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633807.2
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 109 MM, SPIRAL LENGTH 69 MM
44.82
7.3 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633807.3
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 109 MM, SPIRAL LENGTH 69 MM
44.82
7.4 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633807.4
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 109 MM, SPIRAL LENGTH 69 MM
44.82
7.5 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633807.5
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 109 MM, SPIRAL LENGTH 69 MM
23.97
7.6 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633807.6
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 117 MM, SPIRAL LENGTH 75 MM
45.86
7.7 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633807.7
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 117 MM, SPIRAL LENGTH 75 MM
45.86
7.8 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633807.8
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 117 MM, SPIRAL LENGTH 75 MM
45.86
7.9 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633807.9
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 117 MM, SPIRAL LENGTH 75 MM
45.86
8.0 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633808.0
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 117 MM, SPIRAL LENGTH 75 MM
23.97
8.1 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633808.1
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 117 MM, SPIRAL LENGTH 75 MM
52.12
8.2 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633808.2
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 117 MM, SPIRAL LENGTH 75 MM
52.12
8.3 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633808.3
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 117 MM, SPIRAL LENGTH 75 MM
52.12
8.4 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633808.4
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 117 MM, SPIRAL LENGTH 75 MM
52.12
8.5 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633808.5
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 117 MM, SPIRAL LENGTH 75 MM
23.97
8.6 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633808.6
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 125 MM, SPIRAL LENGTH 81 MM
52.12
8.7 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633808.7
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 125 MM, SPIRAL LENGTH 81 MM
52.12
8.8 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633808.8
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 125 MM, SPIRAL LENGTH 81 MM
52.12
8.9 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633808.9
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 125 MM, SPIRAL LENGTH 81 MM
52.12
9.0 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633809.0
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 125 MM, SPIRAL LENGTH 81 MM
26.06
9.1 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633809.1
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 125 MM, SPIRAL LENGTH 81 MM
55.24
9.2 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633809.2
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 125 MM, SPIRAL LENGTH 81 MM
55.24
9.3 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633809.3
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 125 MM, SPIRAL LENGTH 81 MM
55.24
9.4 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633809.4
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 125 MM, SPIRAL LENGTH 81 MM
55.24
9.5 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633809.5
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 125 MM, SPIRAL LENGTH 81 MM
28.14
9.6 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633809.6
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 133 MM, SPIRAL LENGTH 8 MM
55.24
9.7 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633809.7
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 133 MM, SPIRAL LENGTH 87 MM
55.24
9.8 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633809.8
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 133 MM, SPIRAL LENGTH 87 MM
55.24
9.9 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633809.9
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 133 MM, SPIRAL LENGTH 87 MM
55.24
10.0 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633810.0
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 133 MM, SPIRAL LENGTH 87 MM
35.45
10.1 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633810.1
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 133 MM, SPIRAL LENGTH 87 MM
61.50
10.2 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633810.2
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 133 MM, SPIRAL LENGTH 87 MM
61.50
10.3 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633810.3
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 133 MM, SPIRAL LENGTH 87 MM
61.71
10.5 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633810.5
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 133 MM, SPIRAL LENGTH 87 MM
31.06
10.7 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633810.7
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 142 MM, SPIRAL LENGTH 94 MM
63.58
11.0 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633811.0
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 142 MM, SPIRAL LENGTH 94 MM
38.57
11.1 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633811.3
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 142 MM, SPIRAL LENGTH 94 MM
63.58
11.5 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633811.5
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 142 MM, SPIRAL LENGTH 94 MM
37.52
12.0 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633812.0
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 151 MM, SPIRAL LENGTH 101 MM
37.52
12.5 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633812.5
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 151 MM, SPIRAL LENGTH 101 MM
42.94
12.7 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633812.7
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 151 MM, SPIRAL LENGTH 101 MM
67.75
13.0 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633813.0
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 151 MM, SPIRAL LENGTH 101 MM
49.20
13.5 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633813.5
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 160 MM, SPIRAL LENGTH 108 MM
91.68
14.0 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633814.0
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 160 MM, SPIRAL LENGTH 108 MM
73.38