2.0 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633802.0
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 49 MM, SPIRAL LENGTH 24 MM
10.62 £
Hardmetal Drills
The drill is suitable for drilling in abrasive materials such as cast iron, asbestos cement and hardened materials, gears etc. The HM plates can be grinded and it should use a fine grained grindstone.
2.1 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633802.1
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 49 MM, SPIRAL LENGTH 24 MM
30.73 £
2.2 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633802.2
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 53 MM, SPIRAL LENGTH 27 MM
30.73 £
2.3 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633802.3
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 53 MM, SPIRAL LENGTH 27 MM
30.73 £
2.4 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633802.4
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 57 MM, SPIRAL LENGTH 30 MM
30.73 £
2.5 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633802.5
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 57 MM, SPIRAL LENGTH 30 MM
15.53 £
2.6 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633802.6
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 57 MM, SPIRAL LENGTH 30 MM
30.73 £
2.7 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633802.7
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 61 MM, SPIRAL LENGTH 33 MM
30.73 £
2.8 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633802.8
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 61 MM, SPIRAL LENGTH 33 MM
30.73 £
2.9 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633802.9
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 61 MM, SPIRAL LENGTH 33 MM
30.73 £
3.0 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633803.0
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 61 MM, SPIRAL LENGTH 33 MM
11.23 £
3.1 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633803.1
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 65 MM, SPIRAL LENGTH 36 MM
23.28 £
3.2 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633803.2
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 65 MM, SPIRAL LENGTH 36 MM
23.28 £
3.3 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633803.3
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 65 MM, SPIRAL LENGTH 36 MM
16.74 £
3.4 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633803.4
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 70 MM, SPIRAL LENGTH 39 MM
23.13 £
3.5 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633803.5
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 70 MM, SPIRAL LENGTH 39 MM
12.10 £
3.6 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633803.6
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 70 MM, SPIRAL LENGTH 39 MM
23.13 £
3.7 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633803.7
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 70 MM, SPIRAL LENGTH 39 MM
23.13 £
3.8 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633803.8
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 75 MM, SPIRAL LENGTH 43 MM
23.13 £
3.9 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633803.9
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 75 MM, SPIRAL LENGTH 43 MM
23.13 £
4.0 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633804.0
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 75 MM, SPIRAL LENGTH 43 MM
10.36 £
4.1 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633804.1
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 75 MM, SPIRAL LENGTH 43 MM
23.13 £
4.2 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633804.2
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 75 MM, SPIRAL LENGTH 43 MM
12.08 £
4.3 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633804.3
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 80 MM, SPIRAL LENGTH 47 MM
23.13 £
4.4 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633804.4
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 80 MM, SPIRAL LENGTH 47 MM
23.13 £
4.5 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633804.5
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 80 MM, SPIRAL LENGTH 47 MM
10.87 £
4.6 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633804.6
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 80 MM, SPIRAL LENGTH 47 MM
24.16 £
4.7 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633804.7
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 80 MM, SPIRAL LENGTH 47 MM
24.16 £
4.8 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633804.8
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 86 MM, SPIRAL LENGTH 52 MM
24.16 £
4.9 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633804.9
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 86 MM, SPIRAL LENGTH 52 MM
24.16 £
5.0 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633805.0
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 86 MM, SPIRAL LENGTH 52 MM
11.05 £
5.1 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633805.1
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 86 MM, SPIRAL LENGTH 52 MM
13.48 £
5.2 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633805.2
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 86 MM, SPIRAL LENGTH 52 MM
13.48 £
5.3 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633805.3
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 86 MM, SPIRAL LENGTH 52 MM
26.75 £
5.4 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633805.4
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 93 MM, SPIRAL LENGTH 57 MM
26.75 £
5.5 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633805.5
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 93 MM, SPIRAL LENGTH 57 MM
12.03 £
5.6 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633805.6
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 93 MM, SPIRAL LENGTH 57 MM
28.30 £
5.7 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633805.7
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 93 MM, SPIRAL LENGTH 57 MM
28.30 £
5.8 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633805.8
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 93 MM, SPIRAL LENGTH 57 MM
17.60 £
5.9 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633805.9
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 93 MM, SPIRAL LENGTH 57 MM
32.27 £
6.0 MM TWIST DRILL HM-TCT TIP GROUND DIN 338
633806.0
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 93 MM, SPIRAL LENGTH 57 MM
12.25 £
6.1 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633806.1
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 101 MM, SPIRAL LENGTH 63 MM
33.65 £
6.2 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633806.2
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 101 MM, SPIRAL LENGTH 63 MM
33.65 £
6.3 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633806.3
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 101 MM, SPIRAL LENGTH 63 MM
33.65 £
6.4 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633806.4
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 101 MM, SPIRAL LENGTH 63 MM
33.65 £
6.5 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633806.5
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 101 MM, SPIRAL LENGTH 63 MM
13.33 £
6.6 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633806.6
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 101 MM, SPIRAL LENGTH 63 MM
37.10 £
6.7 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633806.7
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 101 MM, SPIRAL LENGTH 63 MM
37.10 £