2.0 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633802.0
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 49 MM, SPIRAL LENGTH 24 MM
119,06 SEK
Hardmetal Drills
The drill is suitable for drilling in abrasive materials such as cast iron, asbestos cement and hardened materials, gears etc. The HM plates can be grinded and it should use a fine grained grindstone.
2.1 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633802.1
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 49 MM, SPIRAL LENGTH 24 MM
344,72 SEK
2.2 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633802.2
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 53 MM, SPIRAL LENGTH 27 MM
344,72 SEK
2.3 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633802.3
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 53 MM, SPIRAL LENGTH 27 MM
344,72 SEK
2.4 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633802.4
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 57 MM, SPIRAL LENGTH 30 MM
344,72 SEK
2.5 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633802.5
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 57 MM, SPIRAL LENGTH 30 MM
174,22 SEK
2.6 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633802.6
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 57 MM, SPIRAL LENGTH 30 MM
344,72 SEK
2.7 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633802.7
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 61 MM, SPIRAL LENGTH 33 MM
344,72 SEK
2.8 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633802.8
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 61 MM, SPIRAL LENGTH 33 MM
344,72 SEK
2.9 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633802.9
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 61 MM, SPIRAL LENGTH 33 MM
344,72 SEK
3.0 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633803.0
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 61 MM, SPIRAL LENGTH 33 MM
125,97 SEK
3.1 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633803.1
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 65 MM, SPIRAL LENGTH 36 MM
261,11 SEK
3.2 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633803.2
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 65 MM, SPIRAL LENGTH 36 MM
261,11 SEK
3.3 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633803.3
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 65 MM, SPIRAL LENGTH 36 MM
187,76 SEK
3.4 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633803.4
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 70 MM, SPIRAL LENGTH 39 MM
259,38 SEK
3.5 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633803.5
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 70 MM, SPIRAL LENGTH 39 MM
135,72 SEK
3.6 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633803.6
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 70 MM, SPIRAL LENGTH 39 MM
259,38 SEK
3.7 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633803.7
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 70 MM, SPIRAL LENGTH 39 MM
259,38 SEK
3.8 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633803.8
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 75 MM, SPIRAL LENGTH 43 MM
259,38 SEK
3.9 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633803.9
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 75 MM, SPIRAL LENGTH 43 MM
259,38 SEK
4.0 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633804.0
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 75 MM, SPIRAL LENGTH 43 MM
116,24 SEK
4.1 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633804.1
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 75 MM, SPIRAL LENGTH 43 MM
259,38 SEK
4.2 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633804.2
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 75 MM, SPIRAL LENGTH 43 MM
135,51 SEK
4.3 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633804.3
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 80 MM, SPIRAL LENGTH 47 MM
259,38 SEK
4.4 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633804.4
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 80 MM, SPIRAL LENGTH 47 MM
259,38 SEK
4.5 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633804.5
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 80 MM, SPIRAL LENGTH 47 MM
121,93 SEK
4.6 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633804.6
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 80 MM, SPIRAL LENGTH 47 MM
271,00 SEK
4.7 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633804.7
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 80 MM, SPIRAL LENGTH 47 MM
271,00 SEK
4.8 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633804.8
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 86 MM, SPIRAL LENGTH 52 MM
271,00 SEK
4.9 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633804.9
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 86 MM, SPIRAL LENGTH 52 MM
271,00 SEK
5.0 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633805.0
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 86 MM, SPIRAL LENGTH 52 MM
123,94 SEK
5.1 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633805.1
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 86 MM, SPIRAL LENGTH 52 MM
151,19 SEK
5.2 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633805.2
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 86 MM, SPIRAL LENGTH 52 MM
151,19 SEK
5.3 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633805.3
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 86 MM, SPIRAL LENGTH 52 MM
300,04 SEK
5.4 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633805.4
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 93 MM, SPIRAL LENGTH 57 MM
300,04 SEK
5.5 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633805.5
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 93 MM, SPIRAL LENGTH 57 MM
134,93 SEK
5.6 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633805.6
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 93 MM, SPIRAL LENGTH 57 MM
317,47 SEK
5.7 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633805.7
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 93 MM, SPIRAL LENGTH 57 MM
317,47 SEK
5.8 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633805.8
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 93 MM, SPIRAL LENGTH 57 MM
197,45 SEK
5.9 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633805.9
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 93 MM, SPIRAL LENGTH 57 MM
361,97 SEK
6.0 MM TWIST DRILL HM-TCT TIP GROUND DIN 338
633806.0
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 93 MM, SPIRAL LENGTH 57 MM
137,37 SEK
6.1 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633806.1
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 101 MM, SPIRAL LENGTH 63 MM
377,46 SEK
6.2 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633806.2
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 101 MM, SPIRAL LENGTH 63 MM
377,46 SEK
6.3 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633806.3
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 101 MM, SPIRAL LENGTH 63 MM
377,46 SEK
6.4 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633806.4
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 101 MM, SPIRAL LENGTH 63 MM
377,46 SEK
6.5 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633806.5
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 101 MM, SPIRAL LENGTH 63 MM
149,56 SEK
6.6 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633806.6
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 101 MM, SPIRAL LENGTH 63 MM
416,16 SEK
6.7 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633806.7
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 101 MM, SPIRAL LENGTH 63 MM
416,16 SEK