2.0 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633802.0
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 49 MM, SPIRAL LENGTH 24 MM
12.82
Hardmetal Drills
The drill is suitable for drilling in abrasive materials such as cast iron, asbestos cement and hardened materials, gears etc. The HM plates can be grinded and it should use a fine grained grindstone.
2.1 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633802.1
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 49 MM, SPIRAL LENGTH 24 MM
37.13
2.2 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633802.2
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 53 MM, SPIRAL LENGTH 27 MM
37.13
2.3 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633802.3
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 53 MM, SPIRAL LENGTH 27 MM
37.13
2.4 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633802.4
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 57 MM, SPIRAL LENGTH 30 MM
37.13
2.5 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633802.5
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 57 MM, SPIRAL LENGTH 30 MM
18.76
2.6 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633802.6
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 57 MM, SPIRAL LENGTH 30 MM
37.13
2.7 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633802.7
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 61 MM, SPIRAL LENGTH 33 MM
37.13
2.8 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633802.8
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 61 MM, SPIRAL LENGTH 33 MM
37.13
2.9 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633802.9
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 61 MM, SPIRAL LENGTH 33 MM
37.13
3.0 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633803.0
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 61 MM, SPIRAL LENGTH 33 MM
13.57
3.1 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633803.1
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 65 MM, SPIRAL LENGTH 36 MM
28.12
3.2 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633803.2
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 65 MM, SPIRAL LENGTH 36 MM
28.12
3.3 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633803.3
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 65 MM, SPIRAL LENGTH 36 MM
20.22
3.4 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633803.4
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 70 MM, SPIRAL LENGTH 39 MM
27.93
3.5 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633803.5
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 70 MM, SPIRAL LENGTH 39 MM
14.62
3.6 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633803.6
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 70 MM, SPIRAL LENGTH 39 MM
27.93
3.7 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633803.7
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 70 MM, SPIRAL LENGTH 39 MM
27.93
3.8 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633803.8
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 75 MM, SPIRAL LENGTH 43 MM
27.93
3.9 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633803.9
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 75 MM, SPIRAL LENGTH 43 MM
27.93
4.0 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633804.0
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 75 MM, SPIRAL LENGTH 43 MM
12.52
4.1 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633804.1
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 75 MM, SPIRAL LENGTH 43 MM
27.93
4.2 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633804.2
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 75 MM, SPIRAL LENGTH 43 MM
14.59
4.3 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633804.3
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 80 MM, SPIRAL LENGTH 47 MM
27.93
4.4 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633804.4
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 80 MM, SPIRAL LENGTH 47 MM
27.93
4.5 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633804.5
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 80 MM, SPIRAL LENGTH 47 MM
13.13
4.6 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633804.6
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 80 MM, SPIRAL LENGTH 47 MM
29.19
4.7 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633804.7
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 80 MM, SPIRAL LENGTH 47 MM
29.19
4.8 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633804.8
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 86 MM, SPIRAL LENGTH 52 MM
29.19
4.9 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633804.9
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 86 MM, SPIRAL LENGTH 52 MM
29.19
5.0 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633805.0
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 86 MM, SPIRAL LENGTH 52 MM
13.35
5.1 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633805.1
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 86 MM, SPIRAL LENGTH 52 MM
16.28
5.2 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633805.2
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 86 MM, SPIRAL LENGTH 52 MM
16.28
5.3 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633805.3
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 86 MM, SPIRAL LENGTH 52 MM
32.31
5.4 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633805.4
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 93 MM, SPIRAL LENGTH 57 MM
32.31
5.5 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633805.5
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 93 MM, SPIRAL LENGTH 57 MM
14.53
5.6 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633805.6
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 93 MM, SPIRAL LENGTH 57 MM
34.19
5.7 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633805.7
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 93 MM, SPIRAL LENGTH 57 MM
34.19
5.8 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633805.8
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 93 MM, SPIRAL LENGTH 57 MM
21.26
5.9 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633805.9
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 93 MM, SPIRAL LENGTH 57 MM
38.98
6.0 MM TWIST DRILL HM-TCT TIP GROUND DIN 338
633806.0
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 93 MM, SPIRAL LENGTH 57 MM
14.79
6.1 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633806.1
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 101 MM, SPIRAL LENGTH 63 MM
40.65
6.2 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633806.2
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 101 MM, SPIRAL LENGTH 63 MM
40.65
6.3 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633806.3
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 101 MM, SPIRAL LENGTH 63 MM
40.65
6.4 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633806.4
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 101 MM, SPIRAL LENGTH 63 MM
40.65
6.5 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633806.5
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 101 MM, SPIRAL LENGTH 63 MM
16.11
6.6 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633806.6
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 101 MM, SPIRAL LENGTH 63 MM
44.82
6.7 MM TWIST DRILL HSS-TCT TIP GROUND DIN 338
633806.7
NORMAL LENGTH, SUITABLE FOR HIGH ALLOY STEEL, LENGTH 101 MM, SPIRAL LENGTH 63 MM
44.82